Kangertech Dripbox 160 W
Kangertech Dripbox 160 W Details:
The original Dripbox is an all-in-one 60W device operated by a single button. The new Dripbox 160 now has three buttons – fire, up, and down – plus an OLED screen that allows you to view your vape settings as you adjust them.
The Dripbox 160 now features a variable wattage output from 7 to 160 watts plus temperature control. The device is powered by two 18650 batteries instead of one to support its higher power requirements.
Compared to the simple, two-post configuration of the Dripbox rebuildable atomizer, the redesigned RDA of the Dripbox 160 looks more like a Velocity-style deck with durable square posts that can easily accommodate thick Clapton coils. It also has two additional juice holes on the deck itself for faster wicking.
Perhaps the most important upgrade on the Dripbox 160 is coil compatibility. You can now use stainless steel, nickel, titanium, and nichrome wires in addition to standard Kanthal.
The “Squonk” Design
Drippers are great for flavor chasers, but dripping juice every five to ten puffs is not the most convenient way to enjoy vaping. The Dripbox 160 makes it easier than ever to drip on an RDA without having to carry several bottles of liquid around.
The Dripmod 160 is fitted with a squonk bottle that can store a whopping 7ml of juice. It is located right where your fingers are gripping the mod so it’s easy to access. Just give it a soft squish after every few puffs to keep the coils saturated.
Dripping Atomizer (Rebuildable & Replaceable)
The Subdrip 160 is a hybrid device that is both a rebuildable and disposable dripping atomizer. Probably the first of its kind in the vaping industry, the Subdrip 160 has a removable deck which you can replace with a pre-built coil system. If you like building coils from scratch, you can still use the Subdrip 160 like a traditional rebuildable atomizer.
Everything you need to get started with dripping is included in the Kanger Dripbox 160 starter kit – except the 18650 batteries. We highly recommend that you use batteries with a minimum discharge of 30 amps.
Note: The Dripmod 160 and the Subdrip 160 are designed for each other. They are not compatible with other RDAs or tanks because of the unique bottom feeding technology. Using an incompatible atomizer tank may cause juice to leak down to the battery or mod.
The Kangertech Dripbox 160 W’s DRIPMOD 160
Made of aluminum zinc alloy and coated with a ceramic paint finish, the Dripmod 160 is designed for advanced vapers with fully customizable settings for voltage, wattage and temperature. Between the fire and function buttons is an OLED screen that displays all your vaping information.
On the side of the Dripmod 160 is a squonk bottle that can store up to 7ml of e-liquid. Running through the center of the “tank” is a thin stainless steel tube that feeds the Dripbox RDA every time you squeeze.
Underneath the Dripmod 160 are two access doors – a pull-out cap for the 18650 batteries and a magnetic cover for the squonk bottle.
Although it is highly recommended to charge your 18650 batteries on an external device, the Dripmod 160 provides internal charging through a USB port on the mod body.
Like any modern vaping device, the Dripmod 160 features a suite of safety features such as 10-second cutoff, reverse battery polarity protection, low resistance protection, low voltage protection, and short circuit protection.
The brass contact pin is gold plated for excellent connectivity with the Dripbox 160 atomizer.
The Kangertech Dripbox 160 W’s SUBDRIP 160
The Subdrip 160 is a 22mm rebuildable dripping atomizer made of stainless steel and coated with a ceramic paint finish.
The Subdrip 160 has four components: mouthpiece, barrel, build deck, and RDA base.
The mouthpiece of the Subdrip 160 features a wide bore drip tip that is fixed to the top cap. Unscrew this section to reveal the build deck when dripping the traditional way. The Dripbox 160 starter kit includes an optional attachment for spitback protection which you can easily install inside the drip tip.
The middle section is a metal barrel that houses the build deck. There are two large air holes designed Cyclops-style, with each vent measuring a whopping 12mm x 1.5mm. Just twist the drip tip to close or open the air holes.
Pulling up the barrel will reveal a Velocity-style two-post build deck that’s perfect for single coil or dual coil configurations. Three thick O-rings secure the deck into the RDA barrel to prevent leaking.
Unlike most RDAs, the build deck of the Subdrip 160 is not fixed to the base of the device. Special threads allow you to screw it in and out so you can replace the entire deck if you do not want to rebuild it with your own coil. The deck that comes with the Dripbox 160 starter kit is already pre-assembled with two coils and organic cotton wicks. The entire bottom of the build deck is made of brass for excellent connectivity. If you’re into rebuilding coils, you’ll have all the tools you need from the Dripbox 160 kit including an Allen key, extra screws, extra coils, and a sheet of organic cotton.
The build deck connects to an RDA base which features eight juice holes around the well and a contact pin at the center. Every time you squeeze the Dripmod squonk bottle, e-liquid will emerge through the juice holes and pool under the coils and wicks – ready to be vaporized with full-bodied flavors.
The Subdrip 160 is exclusively designed for the Dripmod 160. Because the contact pin of this RDA has a hole in the middle for drawing juice from the bottom, liquid could leak when it is used with a different mod.
Kanger Dripbox 160 Features:
Bottom feeding design with top fill option
Wattage output: 7W to 160W
Powered by two 18650 batteries (sold separately)
Rebuildable and replaceable Velocity-style build deck
RDA with bottom feed technology
Minimum resistance: 0.05Ω
7ml juice capacity
Removable drip tip with spitback protection
Micro USB charging
Low resistance protection
Reverse battery protection
Low battery warning
Short circuit protection
Available in black, white and silver colors
Kangertech Dripbox 160 W’s Dripmod 160 Specifications:
Material: zinc alloy
Battery: two replaceable lithium 18650 cells (30A discharge)
Max output: 7W to 200W adjustable in 0.1W increments
Minimum resistance for Ni-200, Ti, SS: 0.05Ω
Minimum resistance for Nichrome: 0.1Ω
Temperature control: 100°C to 315°C or 200°F to 600°F
Liquid capacity: 7ml
Charging: micro USB, DC5V, 1000mA
Dimensions: 84mm x 51mm
Weight: 228g (excluding battery)
For More Kangertech Products CLICK HERE